Відео

ARE YOU SURE THAT THAT IS A CLEANING WAND FOR THE TOILET? MAYBE IT CAN BE USED FOR THAT BUT ALSO MAYBE A BIDET?

One question, how are you going to check tire Pressure?

Thank you. May Jesus continue to bless you and your family

I got a “toe jack” from harbor freight. Which I used to level my shipping containers. It just needed a 1 inch gap, and will lift 12 tons.

At 16:20 you threaded the tape in backwards

Missed you guys. Good progress

I would not reduce your opening from 1.25 to 1 inch, about a 50% difference i flow rate and resistance, only if low flow well otherwise it's restrictive.

Hey!… we are from St. Albans VT and just seeing this a month before we pick up our first Ourdoors RV! So we are planning the exact out and back in a two week window! Where did you end up buying land in VT? Great to learn about your work. We are both dentists in St. Albans. (Fiddlehead dental) look us up if you are nearish and we will connect! - Dr. Lynda Ulrich

Most of these are electrical in nature and are useless to the average RV user.

Thank you for the tip on the Wesson Oil for my bar n chain!

When you were cleaning out the chipper and spinning the flywheel by hand, was the orange safety bar in neutral, forward, or reverse?

I just ordered mine yesterday so I am trying to learn from others before I try mine. When you were feeding the green tops in, where was your feed-speed lever (1/2, 3/4, full, .....) set for the feeding drum rotation speed?

What is your PTO HP?

Why are you using the stupid decals that after years will peal and they look terrible. Look like a old forest river rv

People just cant never be happy...these are campers NOT houses. Never designed for idiots to live in.

We've missed you.

I know you said dogs but it sounded like ducks the first time I heard it! lol

You two can build my house anytime!

Would absolutely love to see more in depth setup or installation videos for these. As we’ve just begun a similar journey to yours, and being a tech guy, I love this stuff. I love the software system to get all that data. It would be a nice to have a series of videos where you talk through where you might begin this journey from beginner components to building out more advanced.

This channel is so screwed up,,,,,,,,,,,,I'm so confused!!!

Glad to see that you are back posting ... I hope that you made it through all the rain from Beryl.

I know I've said it a few times over the years; but it's relevant today as well ... I admire your tenacity...

No bugs and cooler weather. A lot can be done under these conditions even working in the snow not torrential rain.

Progress continues.😉Looking good.👍🏻

Hi guys. How have you been. Long time no hear. Have you started on your cabin yet.

Great video! What R value skirt foam board did you use? Also, did you have excess humidity below the RV?

Whats the point in temp sensors? Rather unneeded information. Setting down in the water its going to be rather cool

what kind of clutch did it have?

I have a primetime tracer 230rbs, added inside door pull handle, under $10 works great, AP sunroof shade, well made and under $50, 10 min install. Kool.rv ac diverter, diverts air from ac to vents to make more efficent, easy 15 min install, under $90. Lippert solid steps and rail.

Why cant i buy a tbar 😢

Great video...very helpful. Thank you for sharing this info, it seems the perfect solution since I don't plan to move my rig for a couple of years. May I ask question if you have the time to respond sometime...Can you prime/paint over the exterior of this board insulation? I'm was thinking of painting it black to "disappear" under the trailer. (The RV park manager is more likely to approve that over the pink color).

13:00 note to self.

I'm so happy to see you had a great result with this experiment. I too grew a tomato plant in a bag of compost and gave it only a bit of blood and bone to start it off. So far, it's doing okay! Did you feed your's or just water it?

🍇🍈🍉🍊🍋🍌🍍🍍🥭🍎🍎🍏🍐🍐🍑

🐵🐒🦍🦧🐶🐕🦮🐕‍🦺🐩🐺🦊🦝

Installing back-to-back sharp 90°s so close to each other will cause you problems. Should've installed a long sweep 90° to lessen the stress and possible clogging on your system.

All this is only for fulltimers. I'm a weekend and a two week RV user. Most usefull for me is The Lithium battery. Most of this is unessescery upgrade. Keep it simple with less issues. I live in Norway and has a US Rv with a RV transformer. 230/120V AC 50/60Hz unit. Im an electrician ha done the changes.

The 3 hose clamps on the pump head should be 180 degrees of each other. Thats the proper way.

🌶🫑🥒🥬🥦🧄🧅🍄🥜🌰🍞🥐

🌶🫑🥒🥬🥦🧄🧅🍄🥜🌰🍞🥐

WTF

Very helpful ty

I know this is a 4 year old video but they just recently had a nasty monsoon mid June. We did it 4 days after in a well built F150 and it was pretty challenging coming from the visitor center. Full size rigs, especially anything bigger than a 1/2 ton will have troubles probably squeezing in between these two huge boulders. One of the river crossings was a super steep and slick exit. Fun trail and if you like to hike, check out Medano Lake. I would do this as an out and back as the road you exit out of after the pass is washboard from hell.

I just started watching your channel from the beginning. I was searching for travelers who use Northwoods or Outdoors RV. I am intrigued with you guys. You are doing exactly what I want to do. Which I am working on. Thank you for videoing your adventures. I know it is not easy .

you may want to check your knife to anvil clearance and slide the anvil closer to the knives... this is the point where tiny branches, leaves, and needles will clog the machine if the tolerance is too loose. a chipper like this doesn't work like a knife - it works like shears, and the two parts need to be close enough together that material can't wedge between them and get past. get them as close as you can without letting them touch.

When rotating your log, put a 2ft piece of pvc pipe over the log stops to keep the log from hanging on the stops. You are also putting your stops backwards. You should have cut 8" cants to get your planks. Good work though.

The guy with the Jesus ballon is an mvp I’ve always seen him there

I didn’t see a ring on her finger. She’s so cute! I may have to visit the dealership just to see her in person.

People from New Mexico here if so leave your yes here 👇👇